E-mail: chinaledfactorys@126.com
Tel: +86-755-89341521
Contact Us

Shenzhen AMB Optoelectronics Technology Co.,Ltd

ADD: Building 3, Huaqiang Industrial Park, Qingfeng Road, Baolong Community, Longgang District, Shenzhen, GD, China. (Near Nanlian Subway Station)

T: +86-755-8934-1521

M: +86-159-1587-5338

Sales Director: Kevin Zheng

Email: chinaledfactorys@126.com

Skype: zhengyibo1991

WeChat: boboeshinez

WhatsApp: +86-159-1587-5338

Home > News > Content


Eight Tips For Improving The Efficiency Of LED Driver Power Supplies

Dec 21, 2018

Everyone knows that the most common way to improve the efficiency of LED driver power supply is to optimize the design of electronic transformer parameters and reduce the eddy current loss caused by ringing. But in addition to this there is no relevant skills? Now I share with you the eight skills to improve the efficiency of LED driver power hope to help everyone.

1. The main current loop PCB is as short as possible. The experience and layout of LAYPCB, this is nothing, the quick way is to look at the works of Dachang.

2. Optimize the transformer parameter design to reduce the eddy current loss caused by ringing. This is more difficult. First of all, we must master the basic knowledge of electromagnetics and design a reasonable transformer. The most important thing is patience. Even if we think of improving the efficiency by 0.5%, we must try it.

3. Reasonable selection of switching devices. This is the balance between cost and performance, what kind of customer requirements, what kind of device to use, but reasonable. If you want efficiency, there is no doubt COOL MOS, low VF output diode.

4. Input EMI part optimization design If you have passed the safety regulations, this part is more studied, mainly the experience.

5. Choosing a high-efficiency topology. This is the beginning of the solution selection, such as PWM and QR PFM. It is necessary to evaluate what kind of topology to choose when presenting the customer's efficiency requirements.

6. Choosing a good electrolytic capacitor Many people have neglected this, and the loss of electrolysis is very large. There is a detailed explanation in the article by Mr. Chen Yongzhen.

7. Under the premise of starting part of the power consumption design efficiency, it is necessary to consider that many chips currently have HV start pins, and the starting current is also getting lower and lower. This is to know more about the new devices, of course, plus Circuit lossless start, etc., I think it is not suitable for LED driver.

8. Chip-assisted power supply optimization This point of the L6562D application document pointed out that 15V is the best, but the LED is generally a wide voltage output, so my choice is to add a linear regulator, so that the chip works at 15V to reduce loss.

led light